| Issue # | Date Discovered | Date Resolved | Change Made By | Origin | Description | Resolution | Artifacts Changed |
|---|---|---|---|---|---|---|---|
| 1 | 10/5/2015 | 10/25/2015 | Nikhil | Filament | Kinking of filament | Use a Coupler | Added a 3D printed coupler |
| 3 | 10/15/2015 | 5/15/2016 | Ihsane | Printing Quality | Nozzle smudges the print quality | Iterate Nozzle Design | Nozzle |
| 4 | 10/15/2015 | 12/25/2015 | Dan | Slic3r | Cannot modify Slic3r due a missing Slic3r file | Contact Developer | Web Based Printing |
| 2 | 10/29/2015 | 11/29/2015 | Ihsane | Rotary Stage | Offset between axis of rotarion and nozzle tip must be minimised | Bend at heat block | Heat block |
| 5 | 10/29/2015 | 11/29/2015 | Astha | Printing Quality | Filament Trail left while moving to home position during pause sequence | Move quickly after pausing | Insertion Layer Algorithm |
| 6 | 11/10/2015 | 11/29/2015 | Ihsane | Rotary Stage | Form factor of rotary stage must be minimised | Use a hollow stepper motor | Rotary Stage |
| 7 | 11/25/2015 | 1/15/2016 | Nikhil | Firmware | PID constants must be tuned for temperature control | Updates constants from EEPROM | Microcontroller EEPROM |
| 8 | 2/1/2016 | 2/16/2016 | Nikhil | Firmware | E1 port not being driven using modified firmware | Intense Debugging of the Firmware | Firmware |
| 9 | 3/15/2016 | 3/28/2016 | Nikhil | Firmware | Inverse Kinematics causing checksum errors while G-code parsing | Reduce time taken to execute IK | Firmware |
| 10 | 3/28/2016 | 515/2016 | Ihsane | Nozzle | Nozzle clogging | Replace Insulator | Nozzle |
Showing 1 to 10 of 11 entries